Phil Jones Bass Ear-Box EB-200 Monitor Loudspeaker

How the Ear Box works: The Ear Box is in its own category. It is not a stage monitor or an earphone; it is somewhere in between. In-Ear monitors can leave you feeling isolated from the environment and stage monitors may bleed into areas where they are not wanted. The speakers in the Ear-Box are ultra-light but very powerful neodymium speakers. The total weight is 2.4 pounds. This allows it to be screw-mounted on a vertical (not boom type) microphone stand. It is positioned at ear level on the opposite side of where you amp is. The distance should be about 3 feet from you. Moving it closer will increase the loudness of the Ear-Box. If you want to reduce the treble, simply angle the Ear Box away from you: The greater the angle, the greater the attenuation of high frequencies. What may sound unusual is that the Ear Box has virtually no load on an amplifier. It is very high impedance: almost 1000 ohms at bass frequencies, tapering down to 24 ohms, at the very highest frequencies. It actually stabilizes the speaker load on you amplifier by acting as a ZOBEL network. The Ear Box high impedance allows it to be connected to just about any bass amplifier, right up to 1000 watt RMS output!

TRADES - LAYAWAY - 0% FINANCING 

Weight:  2.2lbs 

Dimensions (Inches): 6.75 H x 3.75 W x 5.75 D

Speakers: 2 x PJB Proprietary, Neodymium magnet 12 ohm divers

Frequency Response: 250 Hz – 20 KHz

Impedance: max 1000 Ohms at 30 Hz to min 24ohms at 5 KHz Speaker

Connector: Neutrik NL 4 (This will not accept Jack plugs as they can easily fall out with the weight of cable).

Finish: Black epoxy splatter.